Guest Post: SusannahBean DIY Retro Foil Wreath!

I have a soft spot for cheesy Christmas decorations. I love tinsel and candy canes and elves, and if it looks like it came from the 1950s I’m all over it. That’s where the idea for this wreath came from. I wanted something with 50s style but a modern twist, and I wanted to reuse things I already had laying around my house. Thank you, Kaelah, for letting me share this with your readers!!

What you'll need:

• One large (14”) Styrofoam wreath
• One pack of ornaments (feel free to use any assortment of ornaments you have. It looks best if you have
• different sizes)
• One roll heavy duty tinfoil
• Pins
• Kitchen shears (or scissors, but they’ll need to be strong)
• 3”x 3” square of cardstock (for a template, use any thick paper or cardboard)
• Hot glue gun and glue sticks
• (Optional): One 5-6” length of coordinating ribbon to use as a hanger, OR an over the door wreath hanger
  
  

Instructions:

Tear off a length of foil and fold it in half as many times as needed until you get a square pretty close in size to your template. It’s much quicker to cut the foil like this, that way you end up with a lot of squares!

You’ll want to separate the individual squares. Don’t worry if they tear a little bit, or if they aren’t perfect

squares. You’re just going to crumple them up anyway!

Take one square of tinfoil and wrap it loosely around the tip of your finger. Twist the center part of the square around and fold it back on itself. You need to make it thicker at the middle so it won’t rip when you pin it to your wreath, so as long as you can make a little thick spot you’re doing good!

Insert a pin through the thick spot on your foil square.

Then insert the pin into your wreath. Crumple the foil a little, but not too much. Once you get going this won’t matter as much. You want to have each piece standing up as opposed to flattened out. Continue to pin down more foil squares, making sure you’re covering the Styrofoam so that no white shows through.

You don’t need to do the back half of your wreath because you want it to lay flat against your door, so just pin the foil to the top half of your wreath.

After you’ve done a little patch of foil leaves you’ll add your ornaments. Try out an arrangement before you glue it together. It helps to start with the biggest ornament and fill the little ones in around it. Once you’ve settled on an arrangement, glue them down with your hot glue gun. Use lots of glue, you want it to be secure!

Get an assistant if you need to (my kitty Mr. Littlejeans tried to help, but it wasn’t working out, so I enlisted my boyfriend Chris!).

Keep cutting and folding the little squares and pinning them to your wreath. You’ll need quite a few to cover it, so just keep going until it’s completely covered!

Crumple the foil in a way that will cover the white around your ornaments. If you’ve glued your ornaments close enough together, you should not need to pin any foil in between them.

Once your wreath is covered in foil, you’re pretty much done! If you need to use a length of ribbon for your hanger, fold it as I’ve done in the picture below and pin it in place.

Hang your pretty retro wreath on your door and enjoy! All in all, I spent $9 on this little beauty, $5 for the wreath and $4 for the ornaments. It’s a cute way to add Christmas cheer to your house when you’re on a budget! If you make one of your own foil wreaths, I’d love to see it! Leave me a link to it on my blog at susannahbean.com so I can check it out! Happy Holidays!!

---------------------------------------------------

Be sure to drop by Susannah's blog and say hello! A huge thank you for the ultra rad and shiny holiday decor! I hope you're into DIY Week as much as I am! There's more where this is coming from! xo

Guest Post: LindsayHarmony DIY Felt Penguin Ornament!

Hello everyone! I just got my Christmas tree a couple of days ago, and I don’t know about you guys but I love handmade Christmas ornaments! They don’t have to be too complicated either, here’s a tutorial for an easy and fun penguin ornament made of felt and some fabric scraps.

Here’s what you’ll need:

Some felt in a few different colors (one main color for the body plus a few scraps for the beak and bow tie), some fabric scraps, buttons, some ribbon or rick-rack, a needle and thread, some glue, and optional polyester fiber-fill (or other stuffing material).

First, print and cut out the pattern pieces attached, then trace and cut out all your pieces. Part A will be cut from your main color of felt twice, this will be the front and back of the penguin. Part B will be cut from your fabric scraps, this will be the belly. And the bow tie and beak can be cut from other scraps of felt.

Next, you’re going to want to sew or glue the belly piece onto one of your pieces of felt. Line the bottoms of the pieces up. If you’re choosing to sew it on, you only need to sew the arch part, as the bottom will get sewed together later when you sew the back and front together.

Next come the eyes, you can again either sew or glue on the buttons. Then glue on the beak and bow tie. I prefer to glue these rather than sew because they’re so tiny. If you’re using tacky glue, don’t worry about getting any on the felt, it will dry clear!

Now you have the front of the penguin done! If you wanted to make this a no-sew project, you could easily glue on some ribbon to the top of the penguin and he’d be all ready to hang. But if you’d like to stuff the penguin, it’s time to stitch him all together! We’re going to stitch this front piece to the other piece of felt you’ve cut out. Lay the front piece on top of the back, and start to sew a running stitch all around the edges.

Once you get to the top, fold a piece of ribbon or rick-rack and lay it in between the front and back of the penguin. Sew over this to secure it.

Continue sewing all the way around, until you have about 2 inches left to sew. Stuff the penguin as little or as much as you’d like. I personally like mine a little plump =]

Finish off the stitching with a knot and you’re all done!

I love to make these little penguins in all kinds of color + fabric combinations. They make great gifts and look perfect on any tree!

Happy crafting!

-Lindsay

-------------------------------------------------------------

Be sure to stop by Lindsay's etsy shop to see her cute little pieces of felty-goodness! (The shark is my favorite! Followed close behind by the Sweet Autumn headband!) Thanks Lindsay! Stay tuned for a magical metallic foil wreath by SusannahBean coming up later today!

Southern Living Idea House, Kitchen and Dining Room Tour

Sooo many great Before and Afters linked for yesterday's Met Monday. After you finish reading this post, you'll want to scroll on down to check out all the links! :) Thanks to everyone who linked up yesterday. You are what make MM such a fun party each week!


Southern Living Idea House in Senoia Georgia:

A few weeks ago, I toured the Southern Living Idea House in Senoia, Georgia. I took quite a few pics...too many to share in one post, so I'm just sharing a few more each week.


The photos in this posts that are small are from Southern Living Online.




All of the larger pics are photos I took while on the tour. This pic below from SL online is the view standing in the kitchen and looking into a room/butler's pantry at the end of the kitchen.




Here's one side of the pantry... It's interesting seeing the subway tile combined with stained cabinetry. You so often see it with white cabinets... The refrigerator and dishwasher were in here...interesting, huh?




And the other side of this room/pantry... Note the rolling pin collection...




Isn't it fun how you can take the simplest thing and turn it into some cool wall decor. :)




Speaking of wall decor...back out in the kitchen this preserved boxwood decoration hung over the stove.




I'm really into preserved boxwood, though I don't have any in my home. It looks real, is real and lasts a long time!




What do you think about the horsey head above the stove? I can't decide if I like it or not. :) Don't worry...it isn't stuffed or real. That would be a bit Godfather like, wouldn't it? HA! What a unique light fixture! Wish these pics would enlarge...but they won't...I tried.




The tablescape below was on the kitchen table the day we took the tour. Sorry about the angles of some of the pics. The house was literally crawling with folks EVERYWHERE. It made it very difficult to get full views of rooms. That's why so many of the pics you'll see today are close-ups except the smaller pics that I'm pulling from Southern Living, online. I do love this table centerpiece! The natural mantel dressings and tablescape centerpieces were really stunning throughout the home!




The Dining Room...




A little tablescape on the dining room table...




China is Lenox, Holiday...



I'd never been on a Southern Living Idea House tour...but I'm hooked now. If you ever get a chance to go on one...I do recommend it! You can see some of the other posts I've done about this home HERE and HERE. I'll be sharing more soon.

Hair Tutorial

the past few weeks i have had a lot of time to sit around and play on my computer. and try putting together new outfits. and try doing my hair different. and when i saw this tutorial, i knew i had to do it.

when i try it, i will have my own pictures. but isn't it the cutest little easy quick up-do ever?!?!

i love it! ♥

Guest Post: Starry Eyed Charlie DIY Floral Headband!

Hi Everyone!!! I'm Carla from Starry Eyed Charlie.

I've been working on a hair accessory D.I.Y. for some time now and I'm so glad to be doing it for Kaelah's blog. It's very easy and requires few store bought items.

Here's what you'll need:

• Paper
• Sharpie
• Needle
• Thread
• Scissors
• Elastic
• Ribbon
• Different Fabrics (I used 1/2 yd of fabric & a sleeve off a vintage dress)

First, you need to create your stencil. Grab a sheet of paper and fold it lengthwise.

Make sure the fold is at the bottom before you draw in your stencil.

Draw in your shape (I did a couple of different styles to add dimension).

Now begin cutting, making sure again that the crease is at the bottom of your page.

Get your fabric and fold it lengthwise, with the crease at the bottom, just like you did for your paper stencil.

Begin folding your fabric in an accordion, aligned with your stencil. Pin the stencil to the fabric at the bottom. 

Begin cutting.

*It is very important to only cut the top of the stencil into the floral shape. The sides and bottom should never be cut.*

When you're finished cutting, you can open up your fabric and it will look something like this:

Fold it lengthwise again. Get a needle and a long piece of thread to begin stitching. You are creating a long stitch along the crease:

Slowly and gently, pull the thread so the fabric begins to bunch.

When you've stitched the whole length, join the two ends. Now, stitch along the middle of the flower so that the fabric is secure.

I made four flowers.

Measure the ribbon so that it fits 3/4 of the way around your head.

Stitch one end of elastic to the ribbon without measuring or cutting the other end.

Now that one side of elastic has been fastened, put the headband back on your head to measure where to cut the elastic. Your headband should be snug.

Sew this other end of elastic to your ribbon. It should look like this.

Attach your flowers by sewing them on one by one on the headband. I chose to alternate colors.

And the finished product:

Wear it with ruffles and wavy hair for a romantic effect.

 (via Vogue Italia)

Thanks for coming along for this D.I.Y. You can see more on my blog or follow me on twitter.

Fairy Dust and I'm Out.

Love,

C

------------------------------------------------------

Thanks so much to Carla for the lovely DIY! I went out and bought some fabric last night so I can try it out next week once everything is settled down and over with! Stay tuned for some more fabulous guest bloggers and sweet DIYs during Little Chief Honeybee's DIY Week!