Make a Pincushion Tutorial: Welcome to the 146th Metamorphosis Monday!

Greetings! How has your weekend been? I hope you've had a fabulous one! I spent Saturday down in Macon, Georgia with my sister and niece at the Christmas Made in the South Fair.  Mark Ballard was there and it was so good to stop by and chat with him a bit.  Did anyone else go to Christmas Made in the South?  It was packed with folks as you can see in this pic below.

Make a Pincushion!
A few weeks ago, I attended an amazing crafting event.  During this fabulous crafting soiree, one of the crafts we made was an adorable pin cushion.  I was thinking today about what a cute Christmas gift it would make, especially if it were tucked down inside a little sewing box.

Today I created another one and took pics along the way in case you would like to make one for yourself or a friend.  To make your pin cushion, you'll need:

Poly fill
Jar lid (medium size lid works well and you can spray-paint your lid if you like)
Embroidery thread or narrow yarn
Embroidery needle
Scrap fabric
A button that looks pretty with your fabric

Do you recognize my scrap fabric?

It's some of the fabric that was left over from when pillows were made for the dormer window seats...

...located in the upstairs family room.  It's also the same fabric that's on the chairs in this room.

To make your pincushion, you'll want to find a glass or some round object that's a little bigger than your jar lid. I used a La Rochere bee glass.  I placed the glass over the lid to see if it was a little bigger than the zinc lid.  Max inspected and declared it to be the right size.

 Next, using a pencil, draw around the glass onto the "back" side of your fabric, twice.  Cut out both pieces/circles of fabric.

Here's how my fabric circles looked in comparison to the size of my lid.  My lids were 3 inches across at their widest, and the fabric circles measured around 4 inches.

Sew the pieces together with the "right" sides of the fabric together.  Cut a little slit in one side, being careful to NOT cut through to the other piece of fabric.  Turn your cushion inside out where the "right" side of the fabric is now facing outward.  Stuff it with a generous amount of the poly fill.

Here's how it looked stuffed.  I didn't do the greatest job of making it perfectly circular, but don't worry, it will all work out fine in the end.  Perfection is not a requirement for this craft. :)

Thread your embroidery needle, knotting it on just one end.  I used the full thickness of the embroidery thread, which was all six threads.

Stitch up the little slit.

All sewn up.  My pin cushion looks more square than circular here, doesn't it?  lol

Okay, getting to the good part.  Next take your needle and insert it through the dead center of the back of your stuffed cushion.

Bring it out the center of the top and loop it over one side.

Stick it back through the center of the back and pull it through the top center again

...looping it over the section of your cushion that is directly opposite from the loop you made the first time.  Pull the thread tight enough to make your cushion a little poofy.

Do the same thing again, but on opposite sides of the cushion.

This divides your cushion into four equal parts.  Again, pull your thread taunt enough to make your cushion poof up a little, as shown below.

I chose to divide my cushion into 8 equal parts.  You could do just six, if you like.

Here's how it looked on the back when finished.

And, here's the front.  You can adjust the little pieces of thread to make your poofy sections more equal in size.  I kept stopping midstream to take pics so I didn't do the greatest job of pulling my thread taunt each time.  Yours will look more consistent if you're not stopping a lot.

Here's how it looked inside the lid.

I dumped out the buttons from my button jar and tried different buttons on top.

I ultimately went with this cute little kitty cat button.  Predictable, right?  lol  Once you have sewn your button onto the center of your pincushion, you can hot glue your cushion into the lid.  My cushions fit snugly enough that I didn't have to glue them in.  They stayed in just fine on their own.

You'll find the old Ball zinc lids on eBay, without the jars.  Just search for "Ball Mason Jar Lids." I love these two lids.  They still have the old writing on them.  One says, "Plum 1934" and the other one says, "Apple Butter -75." :)

This little pin cushion is super easy to make and very forgiving if you make a boo boo along the way.  You saw my cushion didn't look that circular, but in the end, it looked just fine once it was inside the lid.

Imagine tucking it inside a little sewing box or kit as a holiday or shower gift for a budding seamstress...or even a seasoned seamstress. :)   Happy sewing!

To receive the latest posts, as well as updates about blog parties, subscribe via an RSS Reader or have BNOTP delivered right to your Inbox.  You'll find links to subscribe via RSS and Email on the sidebar to the right.  Thanks for reading; so glad you are here!

Looking forward to your Before and After!

Reading this post via e-mail or RSS feed?
*If you are reading this via email or RSS feed, to view all the Before and Afters posted for today, click HERE.


Metamorphosis Monday:
If you are participating in Metamorphosis Monday you will need to link up the permalink to your MM post and not your general blog address. To get your permalink, click on your post name, then just copy and paste the address that shows up in the address bar at the top of your blog, into the "url" box for InLinkz.

If you'd like to include the MM button in your post, just copy and paste the Met Monday button to your computer or grab the html code from underneath the MM logo under the "BNOTP Parties" header at the top of this blog.

In order to link up, you'll need to include a link in your MM post back to the host blog, Between Naps on the Porch so your regular readers will be able to find the Met Monday party which ensures your friends and fellow bloggers will receive lots of visits, too.

PLEASE DO NOT type in all caps...it spreads the links waaaay out. Thanks!

Let's try something fun today! Please visit the person who linked before you and after you...that way everyone will get some visits. Hope you'll visit more, of course.


Welcome! Thanks for coming to the party!

Easy Sew Pillow with Piping

There are so many ways to make a pillow...just about as many ways as you can possibly dream up.  You can make them from napkins, decorate them with cute buttons, applique them...the possibilities are endless.  When I decided to make two pillows for the swing, as part of my 4th of July makeover of the porch, I wanted to use the same pillow inserts that were already in the existing pillows.  That way, I wouldn't have to buy new inserts and store extra pillows.  At the time, I was thinking the existing covers zipped up.  I really didn't want to deal with zippers when I made the new covers so I had visions of Velcro dancing in my head.

 I was in for a big surprise when I took a closer look at the existing pillows on the swing.  I was wrong...they did not zip up.

Instead, they looked like this.  The back flaps just slightly overlapped.  Cool!  I can do this! :)

I used the existing well-loved and slightly faded covers as a general pattern for the new pillow covers.  Since this would be a patriotic makeover, I chose a solid red fabric for the pillows.  I had never made a pillow before, so I didn't attempt the fancy, scalloped edge seen here on the old pillow case.  Instead, I decided to make navy and white striped cording for the trim/edging.  If you are unfamiliar with making piping, you'll find a tutorial,  HERE.  It's much easier than you might think.

Since the back overlapped like this on my "example" pillows,

I cut the fabric for the back of the pillow 1 1/2-2 inches wider to allow for a little overlap in back.  (The lens cap is there because my camera was having trouble focusing on a blank surface.)

Next, I cut the fabric for the back of the pillow in half.

Note:  If you don't care to swap out your pillow covers, you could just cut you pillow front and back the same and sew it all together, leaving a hole just big enough to get the insert in.  Then stitch your pillow shut by hand.   I wanted the ability to swap covers occasionally, avoiding the cost of buying new inserts and having to store additional pillows.  It's so much easier to just store away pillow covers/cases than whole pillows, especially when you'll only be using them for special occasions...like patriotic holidays, etc...

I hemmed the inside edge of the back pieces where they would eventually overlap each other.

I just turned over a tiny edge and then turned it over again, pinned it and....

...stitched it down.

Next, I pinned the cording I made in THIS post around the outer edge of the fabric piece that was going to be the FRONT of the pillow.  (That's the fabric piece that wasn't cut in half.)

NOTE: My fabric didn't really have a "right" side...both sides looked exactly the same.  If your fabric is printed on one side, you will be pinning your piping down on the "right" side or the side that will show once the pillow is finished.

So, just to be clear, you will lay the cording on the "right" side (or printed side) of the fabric with the seam allowance along the outer edge of the fabric and the cording toward the inside of the fabric as shown below.  Don't look at the bottom of this picture because the cording sort of flipped over there and that may be confusing.  Just look at the top and sides for reference.  If my fabric had a printed side, that's what you'd be seeing up, in this pic below.

I notched the corners of the fabric just like I was taught in 8th grade Home Economics. This helps to eliminate some of the "bulk" of the fabric on those corners. Note: When notching fabric on curves and corners, be careful that you don't cut too far in and clip your stitching.
I eventually clipped off that excess red corner fabric, too...just hadn't done it when this pic was taken.

Now, this is where having cut the piping fabric on the bias came in handy.  If I had not cut my piping fabric on the bias, the piping would not have curved so easily around this corner.  So, even though it's a bit of a pain to cut the piping fabric on the bias when you are making your piping, it pays off later when you're maneuvering it around the corners.

You may see a little puckering of the piping fabric.  I think that's where I pulled a little hard on this stretchy fabric when I was initially making the piping and sort of stretched the fabric a bit.   The striped fabric reminded me of those jeans that are "forgiving" when we have gained a few lbs. ;)

Now that you have your piping pinned down to the "right or printed" side of your fabric, it's time to sew it on.  As with the making of the piping, I needed to use the zipper presser foot (see pic below) to sew the piping to the red pillow fabric.

To attach the piping, just sew along the edge of the piping (see red line below).  You snuggle up the piping with your zipper foot as closely as you can and the needle should fall right along the edge of the piping where you see the red line.  (Excuse my messy red line...best I could do with the "Paint" program.) ;)

Once the piping was sewn down to the front side of the pillow, (sorry I forgot to take a pic of that but it looked just like the pic above where it's pinned on, but minus all the pins)  I attached the two back pieces of fabric with pins, overlapping the two sections where you see the lens cover.  Since I had initially cut the back piece of fabric about 1 1/2-2 inches bigger than the front, the two back pieces overlapped about and inch.  I propped it open with the lens cap for this pic.

Sewing the back pieces on is a bit tricky because you are kind of sewing blind.  You can feel the bump of the piping, (see pic below) and you can sort of see it there under the fabric.  Just snuggle up to the edge of the piping with your zipper foot, don't rush, take your time and all will come out well.

(You may have to switch which side of the zipper foot you are connecting to the sewing machine.  My machine will let you connect the zipper foot to the machine on the right side of the zipper foot or on the left side of the zipper foot.  That way you can make the needle fall on whichever side of the zipper foot, you need it to fall.  That came in handy for this project.)

Once you have sewn on the back pieces, turn your pillow cover right side out and put your pillow insert inside.  Here's how mine looked in back, when finished.  I used the same insert that was inside the old pillows on the swing.

I really liked sewing pillows this way. No need to mess with a zipper or Velcro and the covers are easy to swap out for other covers.  You can really transform a room in your home by changing out the pillows for each season.

If your existing pillows don't have an opening so you can pull out the insert or, if they are stuffed with poly fiber or some type of filler, then just make a new cover for the "whole" pillow and place the whole pillow inside your new cover.  It can be a pain trying to store lots of pillows for different seasons.  This eliminates that issue and all you have to store are the covers.

Here's how the bottom looks where the two pieces of piping came together.  I had to sew those overlapping each other, by hand.  No way my machine was going to go over the top over those thick pieces of trim.

I got turned around on my second pillow and sewed the raw edges of the piping sticking out the wrong way.  When I turned the pillow right side out to put in the insert, there were two raw edges of trim sticking right out in my face. Yikes!   I only did that once and funny enough, it was on the second pillow.  I sewed them facing the right way on the first pillow.  I think I was just tired by that point.

So, basically, while the pillow is still turned wrong side out, overlap the two piping ends where they come together, pointing the raw edges facing outward in the same direction as the raw seams of the pillow edges.  You may need to sew that part by hand...not fun.  Then when you turn your pillow right side out, the raw edges of the ends of the piping will be inside the cover where they belong.  If you make a mistake along the way, don't panic.  Using a seam ripper, just carefully cut out the stitching and correct it.  No one will be the wiser, unless you confess in a blog post for the world to read. ;)

Here's a great suggestion by a reader (Anonymous).  It was left in a comment and it's make perfect sense.  Don't know why I didn't think of this!  Awesome suggestion...thanks!

"Enjoy your blog and love your beautiful porch. I learned a little technique for joining the ends of piping when I sewed for my girls years ago. I have used it on pillow covers, too. When you start sewing on the piping, leave about a 1 inch "tail" of it that you do not sew down. Then when you sew all the way around and are back to the beginning point, use your seamripper to remove about an inch and a half of stitching to get to the cord and cut off about an inch of the cord that you have exposed, but leave the fabric. Then, turn under the raw end of the fabric, and use the fabric that now has no cord in it to enclose the 1 inch tail that you did not sew down in the beginning. Pin it and sew it down. It makes a perfectly neat and nonbulky joint with the cording meeting inside the fabric. It sounds kind of confusing, but is easy if you can make sense of my directions! Thanks for all of the inspiration!"

Here's how the pillows looked on the porch swing...

Hope you found this pillow making tutorial helpful.  If I can make this pillow with my limited sewing experience, I know you can, too!  Happy Sewing!

Other helpful links:
Tutorial for making the striped piping show in this post can be found HERE.
4th of July Porch Makeover can be seen HERE.
Click on the header category "Renovations♦Tutorials" for additional sewing tutorials


Scavenger Hunt Winner:
Thanks so much for your patience. This week was a little busy but I finally had a chance to go through all the entries for the Scavenger Hunt. Thanks so much to all the folks who participated! Loved all your comments in the emails I received.. I numbered the submissions as they came in and using a random number generator, the winner was Debbie who blogs at Jadehollow. Congrats, Debbie!